ZZ-Indexing Rings

ZZ-indexing rings are used in handling and assembling systems. Due to the drive unit which is installed on the outer ring and which is based on a cylinder cam an ex- extremely large inner ring diameter and a high position accuracy are possible. At the same time a high dynamic and soft acceleration process can be realised. The whole unit and especially the ring are very plane.

Function

Indexing function with 4 to 20 steps

Version

Type XL

Ring Diameter

800-2100mm

Cams

through hardened and ground

Torque

up to 41.900Nm (within the dwell phase)

Axial Forces

up to 290 kN

Accessories

- worm gear units respectively gear brake motor
- lifetime lubrication
- mechanical or inductive end switches
- special drilling templates for the ring
- overload clutch

Alternativ dimensions available upon request